Compatibility:

DJI Mavic 1 series  |  DJI Mavic 2 series  |  DJI Mavic Air series  |  DJI Mini series  |  DJI Spark 

CineSleeves M1 are two sets of resistive joystick sleeves that slide directly over the top of your controller’s joysticks to give a similar feel to the resistance feel of the CineSticks. They use specialised silicone designed to give you the smooth control that standard joysticks aren’t capable of.

In this set you get two sets; 1 Soft & 1 Firm pair of CineSleeves.

These were designed originally for the older DJI controllers but they work equally well with many other DJI joysticks as wel.l See the compatibility information below for other compatible controllers. The CineSleeves M1 keep the joysticks at the same height so they are a natural extension to using your drone controller.

You'll be able to achieve those cinematic movements such as pans, dollies, and tilts without any little jitters that are so hard to avoid with standard joysticks.

We use super soft silicone rubber to give you the smooth motion your video needs.

So why do we have these touchy, small joysticks?

When drone flying first started the majority were those homemade FPV drones and when they're raced they needed to be able to turn in microseconds, so it made sense to have such touchy joysticks.

Unfortunately, it seems that nobody at the drone manufacturers ever considered the kind of joysticks that would suit standard consumer drones (cinema drones) so we got lumped with these unsuitable sticks.

Not only are our CineSleeves M1 good for cinematic motion, but due to the very deliberate and smooth motion, we've found that newcomers to droning find they can get the hang of things far quicker.

How to use

Attaching to the CineSleeves M1

1. Remove the rubber grip on the joystick, otherwise, it will fall off when the sleeve is applied
   
   
2. 
   
   Stretch the CineSleeve over the Joystick and push the silicone boot down to the base 
3. Push the top of the CineSleeve down until the joystick just poke through.

Note: When using the CineSleeves, particularly with the Firm boots, letting go of the joysticks may not return to the centre exactly. Instead, you should bring the CineSleeves back to the centre and then confirm visually that there is no drift. 

Compatibility:

DJI Mavic 1 series standard Controllers

DJI Mavic 2 series standard Controllers

DJI Mavic Air series standard Controllers

DJI Mini series Controllers

DJI Spark Controller

 

More coming once tested. If you successfully test these CineSleeves on a controller not covered in this list then please let us know by emailing customerservice@scottymakesstuff.com so we can add it to this list?

 

Downloads:

CineSleeve M1 Instructions

 

Warranty

12 months

 

Video Reviews

Video Reviews

Note:

These videos are for the CineStick R2 version but the effective smoothing will be very similar with the CineSleeves.

Matt Holder from Reflex Films Australia in Perth, shows us why CineSticks give him that winning advantage with their drone footage.

The well known Italian Youtube personality, Bighenet, gives his verdict on the new resistive joysticks called CineSticks. 

Italian Drone YouTuber David Ulivelli

 Ernst Markus Kofler